Skip navigation

Journal Publications [MT] Collection home page

Browse
Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 535
Issue DateTitleAuthor(s)
2009X-ray powder diffraction line profile analysis of mechanically alloyed Cu-Cr powderLahiri I.; Bhargava S.
2018X-ray photoelectron spectroscopy and ion dynamics study of W6+ doped La2Mo2O9 as SOFC electrolyteSiddharth; Bysakh S.; Sil A.
2009X-ray powder diffraction and electron diffraction studies of the thortveitite-related L phase, (Zn,Mn)2V2O7Knowles K.M.; Vickers M.E.; Sil A.; Han Y.-H.; Jaffrenou P.
2005X-ray diffraction line profile analysis for defect study in Cu-1 wt.% Cr-0.1 wt.% Zr alloyKapoor K.; Lahiri D.; Batra I.S.; Rao S.V.R.; Sanyal T.
2004X-ray diffraction line profile analysis for defect study in Zr-2·5% Nb materialKapoor K.; Lahiri D.; Rao S.V.R.; Sanyal T.; Kashyap B.P.
2002X-ray measurement of near surface residual stress in textured cold-worked stress-relieved Zr-2.5%Nb pressure tube materialKapoor K.; Lahiri D.; Padmaprabu C.; Sanyal T.
2014Workability Studies on High Al Ferritic Fe–Al–C AlloysSunil Kumar R.; Prakash U.; Nath S.K.; Baligidad R.G.
1999Wear in cast titanium carbide reinforced ferrous composites under dry slidingRai V.K.; Srivastava R.; Nath S.K.; Ray S.
2012Wear of plasma sprayed conventional and nanostructured Al 2O 3 and Cr 2O 3, based coatingsSingh V.P.; Sil A.; Jayaganthan R.
2012Workability and mechanical properties of ultrasonically cast Al-Al 2O 3 nanocompositesMula S.; Pabi S.K.; Koch C.C.; Padhi P.; Ghosh S.
2015Wear behaviour of an FeAl intermetallic alloy containing carbon and titaniumKant R.; Prakash U.; Agarwala V.; Satya Prasad V.V.
2011Wear behavior and in vitro cytotoxicity of wear debris generated from hydroxyapatite-carbon nanotube composite coatingLahiri D.; Benaduce A.P.; Rouzaud F.; Solomon J.; Keshri A.K.; Kos L.; Agarwal A.
2010Warm multiaxial forging of AISI 1016 steelPadap A.K.; Chaudhari G.P.; Pancholi V.; Nath S.K.
2005Using severe plastic deformation to process multilayered composites from elemental titanium, aluminum, and niobium foilsAcoff V.L.; Zhang R.; Chaudhari G.P.
2007Viscous flow during sintering of attrition milled nanocrystalline titanium powdersDabhade V.V.; Mohan T.R.R.; Ramakrishnan P.
2012Unfolding the damping behavior of multilayer graphene membrane in the low-frequency regimeLahiri D.; Das S.; Choi W.; Agarwal A.
2013Ultrahigh-pressure consolidation and deformation of tantalum carbide at ambient and high temperaturesLahiri D.; Singh V.; Rodrigues G.R.; Costa T.M.H.; Gallas M.R.; Bakshi S.R.; Seal S.; Agarwal A.
2011Ultrathin alumina-coated carbon nanotubes as an anode for high capacity Li-ion batteriesLahiri I.; Oh S.-M.; Hwang J.Y.; Kang C.; Choi M.; Jeon H.; Banerjee R.; Sun Y.-K.; Choi W.
2019Understanding hot workability and flow stress prediction through processing map with microstructural correlation for HY85 steelKumar S.; Rajput S.K.; Kumar N.; Nath S.K.
2008Understanding the complexities of bake hardeningDas S.; Singh S.B.; Mohanty O.N.; Bhadeshia H.K.D.H.
Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 535