Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/18217
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPancholi, Vivek-
dc.contributor.authorKashyap B.P.-
dc.date.accessioned2020-12-03T03:18:41Z-
dc.date.available2020-12-03T03:18:41Z-
dc.date.issued2012-
dc.identifier.citationProceedings of Materials Science Forum, (2012), 374- 377. Mumbai-
dc.identifier.isbn9.78E+12-
dc.identifier.issn2555476-
dc.identifier.urihttps://doi.org/10.4028/www.scientific.net/MSF.702-703.374-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/18217-
dc.description.abstractCommercial grade AA8090 Al-Li alloy sheet contained three layers of distinct microstructural features along thickness direction. The surface layer contained well recrystallized equiaxed grains with higher fraction of T {4 4 11}<11 11 8>, Cu {1 1 2}<111>, H {0 0 1}<110> and CH {0 0 1}<1 2 0> texture components whereas middle layer contained unrecrystallized elongated grains with higher fraction of brass {0 1 1}<211>, CG {0 2 1}<100> and goss{011}<100> texture components. Superplastic forming of the separated surface and middle layers was carried out at constant pressure. Microstructure and texture evolution was studied at different location of the formed bulge. The extent of texturing or anisotropy was calculated from standard deviation of texture estimated normal anisotropy (R) values, Rstdev. At all conditions, in both the surface and middle layers, the texture randomization was found to be more at the apex than that at the edge of the bulge. The overall reduction in texturing was predominantly accompanied by weakening in strong texture components and strengthening in the weaker ones. © (2012) Trans Tech Publications, Switzerland.-
dc.description.sponsorshipBruker AXS;Icon analytical / FEI;Panalytical;Ametek / CAMECA / EDAX;Oxford Instruments-
dc.language.isoen_US-
dc.relation.ispartofProceedings of Materials Science Forum-
dc.subjectAl-Li 8090 alloy-
dc.subjectSuperplastic forming-
dc.subjectTexture-
dc.titleMicrostructural evolution during superplastic forming of Al-Li 8090 alloy-
dc.typeConference Paper-
dc.scopusid14071738800-
dc.scopusid35552765000-
dc.affiliationPancholi, V., Department of Metallurgical and Materials Engineering, IIT Roorkee, Roorkee, India-
dc.affiliationKashyap, B.P., Department of Metallurgical Engineering and Materials Science, IIT Bombay, Powai, Mumbai, India-
dc.description.correspondingauthorPancholi, V.; Department of Metallurgical and Materials Engineering, IIT Roorkee, Roorkee, India; email: vivekfmt@iitr.ernet.in-
dc.identifier.conferencedetails16th International Conference on Textures of Materials, ICOTOM 16, Mumbai, 12-17 December 2011-
Appears in Collections:Conference Publications [MT]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.