Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/18217
Title: Microstructural evolution during superplastic forming of Al-Li 8090 alloy
Authors: Pancholi, Vivek
Kashyap B.P.
Published in: Proceedings of Materials Science Forum
Abstract: Commercial grade AA8090 Al-Li alloy sheet contained three layers of distinct microstructural features along thickness direction. The surface layer contained well recrystallized equiaxed grains with higher fraction of T {4 4 11}<11 11 8>, Cu {1 1 2}<111>, H {0 0 1}<110> and CH {0 0 1}<1 2 0> texture components whereas middle layer contained unrecrystallized elongated grains with higher fraction of brass {0 1 1}<211>, CG {0 2 1}<100> and goss{011}<100> texture components. Superplastic forming of the separated surface and middle layers was carried out at constant pressure. Microstructure and texture evolution was studied at different location of the formed bulge. The extent of texturing or anisotropy was calculated from standard deviation of texture estimated normal anisotropy (R) values, Rstdev. At all conditions, in both the surface and middle layers, the texture randomization was found to be more at the apex than that at the edge of the bulge. The overall reduction in texturing was predominantly accompanied by weakening in strong texture components and strengthening in the weaker ones. © (2012) Trans Tech Publications, Switzerland.
Citation: Proceedings of Materials Science Forum, (2012), 374- 377. Mumbai
URI: https://doi.org/10.4028/www.scientific.net/MSF.702-703.374
http://repository.iitr.ac.in/handle/123456789/18217
Issue Date: 2012
Keywords: Al-Li 8090 alloy
Superplastic forming
Texture
ISBN: 9.78E+12
ISSN: 2555476
Author Scopus IDs: 14071738800
35552765000
Author Affiliations: Pancholi, V., Department of Metallurgical and Materials Engineering, IIT Roorkee, Roorkee, India
Kashyap, B.P., Department of Metallurgical Engineering and Materials Science, IIT Bombay, Powai, Mumbai, India
Corresponding Author: Pancholi, V.; Department of Metallurgical and Materials Engineering, IIT Roorkee, Roorkee, India; email: vivekfmt@iitr.ernet.in
Appears in Collections:Conference Publications [MT]

Files in This Item:
There are no files associated with this item.
Show full item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.