Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/18215
Title: Multipass friction-stir processing and its effect on mechanical properties of aluminum alloy 5086
Authors: Ramesh K.N.
Pradeep S.
Pancholi, Vivek
Published in: Proceedings of Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Abstract: Twelve-pass friction stir processing (FSP), with 50 pct overlap was carried out on aluminum alloy 5086-O rolled plates to obtain total area of 40 9 150 mm2. Two methods of friction-stir processing, intermittent multipass friction stir processing (IMP), and continuous multipass stir processing (CMP) were carried out, and their effect on the mechanical properties of the processed material was studied. The results revealed that material subjected to IMP showed better mechanical properties compared with the material subjected to CMP. Also, a variation in mechanical properties was observed with an increase in the tool traverse speed for single-pass, CMP, and IMP types of processing. © 2012 The Minerals, Metals & Materials Society and ASM International.
Citation: Proceedings of Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, (2012), 4311- 4319
URI: https://doi.org/10.1007/s11661-012-1232-3
http://repository.iitr.ac.in/handle/123456789/18215
Issue Date: 2012
Keywords: Friction stir processing
Multi-pass
Rolled plates
Traverse speed
Friction
Mechanical properties
ISSN: 10735623
Author Scopus IDs: 57200085213
54882930700
14071738800
Author Affiliations: Ramesh, K.N., Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee (IITR), Roorkee 247 667, Uttarakhand, India
Pradeep, S., Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee (IITR), Roorkee 247 667, Uttarakhand, India
Pancholi, V., Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee (IITR), Roorkee 247 667, Uttarakhand, India
Funding Details: The authors gratefully acknowledge support from Department of Science and Technology, India under fast track scheme for young scientists, Grant No. SR/ FTP/ETA-44/2007, used for conducting out this research.
Corresponding Author: Ramesh, K.N.; Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee (IITR), Roorkee 247 667, Uttarakhand, India
Appears in Collections:Conference Publications [MT]

Files in This Item:
There are no files associated with this item.
Show full item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.