Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/17966
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShandilya P.-
dc.contributor.authorJain, P. K.-
dc.contributor.authorJain N.K.-
dc.date.accessioned2020-12-03T03:14:37Z-
dc.date.available2020-12-03T03:14:37Z-
dc.date.issued2012-
dc.identifier.citationProceedings of Advanced Materials Research, (2012), 6679- 6683. Singapore-
dc.identifier.isbn9.78E+12-
dc.identifier.issn10226680-
dc.identifier.urihttps://doi.org/10.4028/www.scientific.net/AMR.383-390.6679-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/17966-
dc.description.abstractWire electric discharge machining (WEDM) process is considered to be one of the most suitable processes for machining metal matrix composite (MMC) materials. Lot of research work has been done on WEDM process, but very few investigations have been done on WEDM of MMCs. The purpose of this research work is to develop the artificial neural network (ANN) model to predict the material removal rate (MRR) during WEDM of SiC p/6061 Al MMC. In this work four input parameters namely servo voltage, pulse-on time, pulse-off time and wire feed rate were used to develop the ANN model. The output parameter of the model was MRR. A Box-Behnken design (BBD) approach of response surface methodology (RSM) was used to generate the input output database required for the development of ANN model. Training of the neural network models were performed on 29 experimental data points. The predicted values obtained from ANN model show that model can predict MRR with reasonable accuracy. The good agreement is obtained between the ANN predicted values and experimental values. In the present case, the value of correlation coefficient (R) equal to 0.9968, is closer to unity for ANN model of MRR. This clearly indicates that prediction accuracy is higher for ANN model.-
dc.description.sponsorshipSingapore Institute of Electronics-
dc.language.isoen_US-
dc.relation.ispartofProceedings of Advanced Materials Research-
dc.subjectArtificial neural network (ANN)-
dc.subjectMaterial removal rate (MRR)-
dc.subjectMetal matrix composite (MMC)-
dc.subjectWire electric discharge cutting (WEDM)-
dc.titleNeural network based modeling in wire electric discharge machining of SiC p/6061 aluminum metal matrix composite-
dc.typeConference Paper-
dc.scopusid54785113700-
dc.scopusid7402520507-
dc.scopusid56215745200-
dc.affiliationShandilya, P., Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee, 247667, India-
dc.affiliationJain, P.K., Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee, 247667, India-
dc.affiliationJain, N.K., Department of Mechanical Engineering, Indian Institute of Technology, Indore 452 017, India-
dc.description.correspondingauthorShandilya, P.; Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee, 247667, India; email: pragya.shan@gmail.com-
dc.identifier.conferencedetails2011 International Conference on Manufacturing Science and Technology, ICMST 2011, Singapore, 16-18 September 2011-
Appears in Collections:Conference Publications [ME]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.