Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/17957
Title: Study on wire electric discharge machining based on response surface methodology and genetic algorithm
Authors: Shandilya P.
Jain, P. K.
Jain N.K.
Published in: Proceedings of Advanced Materials Research
Abstract: Wire electric discharge machining (WEDM) is one of the most popular non-conventional machining processes for machining metal matrix composites (MMCS). The present research work deals the parametric optimization of the input process parameters for response parameter during WEDM of SiCp/6061 Al metal matrix composite (MMC). Response surface methodology (RSM) and genetic algorithm (GA) integrated with each other to optimize the process parameters. RSM has been used to plan and analyze the experiments. Four WEDM parameters namely servo voltage, pulse-on time, pulse-off time and wire feed rate were varied to study their effect on the quality of cut in SiCp/6061 Al MMC using cutting width (KERF) as response parameter. The relationship between kerf and machining parameters has been developed by using RSM. The mathematical model thus than developed was then employed on GA to optimized the process parameters. © (2013) Trans Tech Publications, Switzerland.
Citation: Proceedings of Advanced Materials Research, (2013), 1280- 1284. New Delhi
URI: https://doi.org/10.4028/www.scientific.net/AMR.622-623.1280
http://repository.iitr.ac.in/handle/123456789/17957
Issue Date: 2013
Keywords: Cutting width (KERF)
Genetic algorithm (GA)
Metal matrix composite (MMC)
Response surface methodology (RSM)
Wire electric discharge cutting (WEDM)
ISBN: 9.78E+12
ISSN: 10226680
Author Scopus IDs: 54785113700
7402520507
56215745200
Author Affiliations: Shandilya, P., Department of Mechanical Engineering, IMS Engineering College, GHAZIABAD, 201011, India
Jain, P.K., Department of Mechanical and Industrial Engineering, Indian Institute of Technology, ROORKEE, 247667, India
Jain, N.K., Department of Mechanical Engineering, Indian Institute of Technology, INDORE 452 017, India
Corresponding Author: Shandilya, P.; Department of Mechanical Engineering, IMS Engineering College, GHAZIABAD, 201011, India; email: pragya.shan@gmail.com
Appears in Collections:Conference Publications [ME]

Files in This Item:
There are no files associated with this item.
Show full item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.