Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/17949
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSingh H.-
dc.contributor.authorJain, P. K.-
dc.contributor.editorKatalinic B.-
dc.date.accessioned2020-12-03T03:14:35Z-
dc.date.available2020-12-03T03:14:35Z-
dc.date.issued2015-
dc.identifier.citationProceedings of Procedia Engineering, (2015), 907- 911-
dc.identifier.issn18777058-
dc.identifier.urihttps://doi.org/10.1016/j.proeng.2015.01.448-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/17949-
dc.description.abstractThe process performance of electrochemical honing (ECH) is often increased by the use of the appropriate and optimal input process parameters. This study focuses on the types of power supply and inter-electrode gap in ECH of spur gears, with the aim to determine which parameters are most significant for the required output. Based on the experimental findings, pulse assisted ECH gives marginal improvement in surface finish at the cost of three times higher processing time as compared with direct current ECH and higher value of IEG up to 1 mm helps to give controlled anodic dissolution in ECH of spur gears. © 2015 Published by Elsevier Ltd.-
dc.language.isoen_US-
dc.publisherElsevier Ltd-
dc.relation.ispartofProceedings of Procedia Engineering-
dc.subjectECH-
dc.subjectIEG-
dc.subjectPower supply-
dc.subjectPrecision finishing-
dc.subjectSpur gear-
dc.titleRole of the power supply and inter-electrode gap in electrochemical honing process-
dc.typeConference Paper-
dc.scopusid55627877357-
dc.scopusid7402520507-
dc.affiliationSingh, H., Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee, Uttrakhand, 247667, India-
dc.affiliationJain, P.K., Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee, Uttrakhand, 247667, India-
dc.description.correspondingauthorSingh, H.; Department of Mechanical and Industrial Engineering, Indian Institute of Technology RoorkeeIndia; email: hps85@yahoo.com-
dc.identifier.conferencedetails25th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2014, 26-29 November 2014-
Appears in Collections:Conference Publications [ME]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.