Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/17828
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMisra J.P.-
dc.contributor.authorJain, P. K.-
dc.contributor.authorDwivedi, Dheerendra Kumar-
dc.contributor.authorMerita N.K.-
dc.date.accessioned2020-12-03T03:14:23Z-
dc.date.available2020-12-03T03:14:23Z-
dc.date.issued2013-
dc.identifier.citationProceedings of Procedia Engineering, (2013), 1259- 1266. Chennai-
dc.identifier.issn18777058-
dc.identifier.urihttps://doi.org/10.1016/j.proeng.2013.09.206-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/17828-
dc.description.abstractElectrochemical honing (ECH) is emerging as a potential gear finishing technique in which achieved surface finish and material removal are significantly influenced by the processing time. This paper comprises the findings of experimental investigation to explore the influence of processing time on process performance parameters: surface quality of gear teeth profile, tribological performance of the teeth surface and process capability and thus, to estimate the optimum processing time by graphical analysis. The emphatic characteristics of developed machine setup and guidelines for future research have also been discussed to stimulate the research community to carry out further research in this field to mature the process. © 2013 The Authors. Published by Elsevier Ltd.-
dc.language.isoen_US-
dc.publisherElsevier Ltd-
dc.relation.ispartofProceedings of Procedia Engineering-
dc.subjectBevel gears-
dc.subjectElectrochemical honing-
dc.subjectGears finishing-
dc.subjectMRR-
dc.subjectSurface roughness-
dc.titleStudy of time dependent behaviour of ECH of bevel gears-
dc.typeConference Paper-
dc.scopusid36722065500-
dc.scopusid7402520507-
dc.scopusid7004266679-
dc.scopusid55990644400-
dc.affiliationMisra, J.P., Dept.of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India-
dc.affiliationJain, P.K., Dept.of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India-
dc.affiliationDwivedi, D.K., Dept.of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India-
dc.affiliationMerita, N.K., Dept.of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India-
dc.description.fundingThe authors wish to acknowledge the financial support obtained from DST, New Delhi, India under grant no SR/S3/MERC-0068/2010(G).-
dc.description.correspondingauthorMisra, J.P.; Dept.of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India; email: joyprakash.misra@gmail.com-
dc.identifier.conferencedetails2013 International Conference on Design and Manufacturing, IConDM 2013, Chennai, 18-20 July 2013-
Appears in Collections:Conference Publications [ME]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.