Skip navigation
DSpace logo
  1. IITR's Institutional Repository
  2. Research Publications
  3. Polymer and Process Engineering [PE]
  4. Journal Publications [PE]
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/14895
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSahoo S.K.-
dc.contributor.authorKhandelwal V.-
dc.contributor.authorManik, Gaurav-
dc.date.accessioned2020-10-15T12:44:24Z-
dc.date.available2020-10-15T12:44:24Z-
dc.date.issued2019-
dc.identifier.citationInternational Journal of Adhesion and Adhesives (2019), 89(): 174-177-
dc.identifier.issn1437496-
dc.identifier.urihttps://doi.org/10.1016/j.ijadhadh.2019.01.007-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/14895-
dc.description.abstractBoth epoxidized linseed oil and transesterified epoxidized linseed oil were acrylated to form UV curable bio-based oligomers. The synthesis was confirmed by FTIR and 1 H NMR and oxirane oxygen content (OOC). The OOC value of epoxidized linseed oil was determined to be 8.2 % which was reduced to 8.0 % after transesterification confirming the retaining of epoxy groups. The lower OOC of acrylated epoxidized linseed oil (AELO) (2.1 %) and acrylated epoxy methyl esters (AEME) (0.9 %) revealed successful acrylation. The degree of acrylation in AEME was higher (~ 90 %) than AELO (~ 77%) and most importantly, the viscosity of AEME was much lower than AELO revealing better processability for industrial use. © 2019 Elsevier Ltd-
dc.language.isoen_US-
dc.publisherElsevier Ltd-
dc.relation.ispartofInternational Journal of Adhesion and Adhesives-
dc.subjectAcrylation-
dc.subjectBio-based adhesives-
dc.subjectEpoxidized linseed oil-
dc.subjectTransesterification-
dc.titleSynthesis and characterization of low viscous and highly acrylated epoxidized methyl ester based green adhesives derived from linseed oil-
dc.typeArticle-
dc.scopusid57203054461-
dc.scopusid57191897120-
dc.scopusid56595314900-
dc.affiliationSahoo, S.K., Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Saharanpur Campus, Paper Mill Road, Saharanpur, UP 247001, India-
dc.affiliationKhandelwal, V., Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Saharanpur Campus, Paper Mill Road, Saharanpur, UP 247001, India-
dc.affiliationManik, G., Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Saharanpur Campus, Paper Mill Road, Saharanpur, UP 247001, India-
dc.description.fundingAuthors are grateful to SERB, DST, Govt of India for the financial support under NPDF scheme.;This work was supported by Science and Engineering Research Board ( SERB ), Govt of India [ PDF/2015/000705 ].-
dc.description.correspondingauthorSahoo, S.K.; Department of Polymer and Process Engineering, Indian Institute of Technology Roorkee, Saharanpur Campus, Paper Mill Road, India; email: sushanta@niist.res.in-
Appears in Collections:Journal Publications [PE]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.