Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/12795
Title: Effects of orientation on hardness, strain accumulation, and fracture
Authors: Suresh, K. S.
Kitashima T.
Yamabe-Mitarai Y.
Published in: Materials Science and Engineering A
Abstract: Effects of orientation on mechanical properties of near α titanium alloy IMI834 have been investigated. Orientation dependent hardness was characterized by micro hardness testing and electron back scattered diffraction (EBSD). Strain accumulation of samples subjected to tensile, compression and Charpy impact tests at room temperature and at 650. °C was analyzed using EBSD. The [0001] orientation shows the highest hardness; lower values of hardness occurred for orientations along the [101-0][312-0] axis. Differences in hardness between different orientations were discussed based on the activation of different slip and twinning systems. During tensile and Charpy impact tests at both temperatures, localized deformations restricted the strain accumulation at regions farther from the fracture surface. In both high-temperature tensile and compression tests, large orientation gradients occurred primarily at grains having lower hardness; however, the converse was not true. Apart from grain orientation, orientations of neighboring grains also have a strong influence on the development of orientation gradient. Irrespective of the test conditions and orientation, twinned regions accommodate considerably less strain and orientation gradient compared with those of the surrounding matrix. © 2014 Elsevier B.V.
Citation: Materials Science and Engineering A (2014), 618(): 335-344
URI: https://doi.org/10.1016/j.msea.2014.09.031
http://repository.iitr.ac.in/handle/123456789/12795
Issue Date: 2014
Publisher: Elsevier Ltd
Keywords: EBSD
Hardness measurement
Hcp
Mechanical characterization
Titanium alloys
Twinning
ISSN: 9215093
Author Scopus IDs: 54882593400
12807889100
7006561531
Author Affiliations: Suresh, K.S., Functional Structural Materials Group, High Temperature Materials Unit, National Institute for Materials Science, 1-2-1, Sengen, Tsukuba, Ibaraki, 305-0047, Japan
Kitashima, T., Functional Structural Materials Group, High Temperature Materials Unit, National Institute for Materials Science, 1-2-1, Sengen, Tsukuba, Ibaraki, 305-0047, Japan
Yamabe-Mitarai, Y., Functional Structural Materials Group, High Temperature Materials Unit, National Institute for Materials Science, 1-2-1, Sengen, Tsukuba, Ibaraki, 305-0047, Japan
Corresponding Author: Suresh, K.S.; Functional Structural Materials Group, High Temperature Materials Unit, National Institute for Materials Science, 1-2-1, Sengen, Japan
Appears in Collections:Journal Publications [MT]

Files in This Item:
There are no files associated with this item.
Show full item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.