Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/12722
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKarmakar, Anish-
dc.contributor.authorMukherjee S.-
dc.contributor.authorKundu S.-
dc.contributor.authorSrivastava D.-
dc.contributor.authorMitra R.-
dc.contributor.authorChakrabarti D.-
dc.date.accessioned2020-10-15T12:27:52Z-
dc.date.available2020-10-15T12:27:52Z-
dc.date.issued2017-
dc.identifier.citationMaterials Characterization (2017), 132(): 31-40-
dc.identifier.issn10445803-
dc.identifier.urihttps://doi.org/10.1016/j.matchar.2017.08.003-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/12722-
dc.description.abstractThe beneficial effect of increasing the C and N contents on precipitation strengthening in V-microalloyed steels is well known. However both C and N levels cannot be increased simultaneously as that can hamper the ductility and weldability of the steel. Therefore either higher C level or higher N level needs to be maintained. The present study is undertaken to understand the effect of C and N contents on the microstructure and precipitation in flat-rolled strips of V-microalloyed steels. During industrial processing, hot-rolled strips are subjected to a coiling treatment where V-precipitation primarily occurs. Therefore, besides steel composition, the effect of coiling temperature on the evolution of microstructure and precipitation in V-microalloyed steels needs to be studied. In order to achieve these objectives, two different V steels (0.05 wt% V), one having higher C and lower N content (HCLN steel) and the other having lower C and higher N content (LCHN steel) were prepared and subjected to hot-deformation followed by isothermal holding treatments over a temperature range of 500–750 °C inside Gleeble® thermo-mechanical simulator. The purpose of isothermal holding study was to simulate the industrial coiling treatment. Simulated samples were characterized in detail and the maximum precipitation strengthening from fine V(C,N) precipitates was obtained at an intermediate range of isothermal holding temperatures (600–650 °C) in both the steels. In spite of the relatively coarser ferrite grain size and smaller fraction of pearlite and bainite, the yield strength of LCHN steel was close to HCLN steel and LCHN steel also showed superior ductility. © 2017 Elsevier Inc.-
dc.language.isoen_US-
dc.publisherElsevier Inc.-
dc.relation.ispartofMaterials Characterization-
dc.subjectCarbon content-
dc.subjectHardness-
dc.subjectIsothermal holding-
dc.subjectNitrogen content-
dc.subjectPrecipitation strengthening-
dc.subjectTensile properties-
dc.subjectVanadium microalloyed steel-
dc.titleEffect of composition and isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels-
dc.typeArticle-
dc.scopusid55510104200-
dc.scopusid57205520323-
dc.scopusid23009089000-
dc.scopusid57196741375-
dc.scopusid56225235900-
dc.scopusid12792743400-
dc.affiliationKarmakar, A., Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal 721-302, India-
dc.affiliationMukherjee, S., Product Research Group, Research and Development, Tata Steel, Jamshedpur, Jharkhand 831-001, India-
dc.affiliationKundu, S., Research and Development, Tata Steel, Jamshedpur, Jharkhand 831-001, India-
dc.affiliationSrivastava, D., Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Trombay, Mumbai, Maharashtra 400-085, India-
dc.affiliationMitra, R., Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal 721-302, India-
dc.affiliationChakrabarti, D., Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur, West Bengal 721-302, India-
dc.description.fundingThe authors duly acknowledge the financial support received from the Research & Development and Scientific Services Division of Tata Steel, Jamshedpur, experimental facilities offered by IIT Kharagpur and equipment grant provided by Sponsored Research and Industrial Consultancy, IIT Kharagpur through SGDRI scheme. Authors would also like to sincerely thank Mr. S. Neogy and Dr. G.K. Dey from the Materials Science Division of Bhabha Atomic Research Centre, Mumbai for their help and support in performing some experimental studies for this work.-
dc.description.correspondingauthorKarmakar, A.; Department of Metallurgical and Materials Engineering, Indian Institute of Technology KharagpurIndia; email: 10mt70p03@iitkgp.ac.in-
Appears in Collections:Journal Publications [MT]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.