Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/12602
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPanigrahi S.K.-
dc.contributor.authorJayaganthan R.-
dc.contributor.authorPancholi, Vivek-
dc.contributor.authorGupta M.-
dc.date.accessioned2020-10-15T12:27:44Z-
dc.date.available2020-10-15T12:27:44Z-
dc.date.issued2010-
dc.identifier.citationMaterials Chemistry and Physics (2010), 122(1): 188-193-
dc.identifier.issn2540584-
dc.identifier.urihttps://doi.org/10.1016/j.matchemphys.2010.02.032-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/12602-
dc.description.abstractThe microstructural evolution and precipitation behavior of cryorolled Al 6063 alloy were investigated. The Al 6063 alloy plates were solutionized and cryorolled with thickness reduction of 25% and 93%. The phase identification and microstructure of the cryorolled Al alloy sample were carried out by XRD, electron backscattered diffraction (EBSD) analysis and TEM. The cryorolled Al alloy upon 93% thickness reduction exhibits ultrafine grain structure. The DSC results of cryorolled Al 6063 alloy obtained at different heating rate are used to calculate activation energies for the evolution of precipitates. The influence of different reduction rates on activation energy of precipitate formation in the cryorolled Al 6063 alloy was analyzed. It was clear from the present study that an ultrafine-grained Al 6063 alloy exhibits a higher driving force for the precipitation formation when compared to bulk Al alloy. © 2010 Elsevier B.V. All rights reserved.-
dc.language.isoen_US-
dc.relation.ispartofMaterials Chemistry and Physics-
dc.subjectA. Alloys-
dc.subjectC. Differential scanning calorimetry-
dc.subjectD. Microstructure-
dc.titleA DSC study on the precipitation kinetics of cryorolled Al 6063 alloy-
dc.typeArticle-
dc.scopusid23470026700-
dc.scopusid6602183770-
dc.scopusid14071738800-
dc.scopusid7403986960-
dc.affiliationPanigrahi, S.K., Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee, Roorkee, 247667, India-
dc.affiliationJayaganthan, R., Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee, Roorkee, 247667, India-
dc.affiliationPancholi, V., Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee, Roorkee, 247667, India-
dc.affiliationGupta, M., Materials Science Division, Department of Mechanical Engineering, National University of Singapore, Singapore-
dc.description.correspondingauthorJayaganthan, R.; Department of Metallurgical and Materials Engineering, Indian Institute of Technology Roorkee, Roorkee, 247667, India; email: rjayafmt@iitr.ernet.in-
Appears in Collections:Journal Publications [MT]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.