Skip navigation
DSpace logo
  1. IITR's Institutional Repository
  2. Research Publications
  3. Mechanical and Industrial Engineering [ME]
  4. Journal Publications [ME]
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/12413
Full metadata record
DC FieldValueLanguage
dc.contributor.authorThapliyal S.-
dc.contributor.authorDwivedi, Dheerendra Kumar-
dc.date.accessioned2020-10-15T12:23:13Z-
dc.date.available2020-10-15T12:23:13Z-
dc.date.issued2016-
dc.identifier.citationTribology International (2016), 97(): 124-135-
dc.identifier.issn0301679X-
dc.identifier.urihttps://doi.org/10.1016/j.triboint.2016.01.008-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/12413-
dc.description.abstractThis paper embodies the findings of a study on the effect of normal load, sliding velocity, and surface temperature on the dry sliding wear behavior of friction stir processed C95500 nickel aluminum bronze (NAB) alloy. Adhesive wear behavior was studied using the pin on disk tribometer as per ASTM G99-04 standard, using two level full factorial approachs. The friction processed (FSPed) surface under study showed lower wear rate than as-cast alloy. The wear rate in both conditions, as-cast as well as FSPed, at high temperature was found lower than the one during ambient temperature condition. The wear mode and operating wear mechanism were assessed through SEM study of the worn surface and wear debris. © 2016 Elsevier Ltd. All rights reserved.-
dc.language.isoen_US-
dc.publisherElsevier Ltd-
dc.relation.ispartofTribology International-
dc.subjectFriction-
dc.subjectFriction stir processing-
dc.subjectNickel aluminum bronze-
dc.subjectWear-
dc.titleStudy of the effect of friction stir processing of the sliding wear behavior of cast NiAl bronze: A statistical analysis-
dc.typeArticle-
dc.scopusid57094929900-
dc.scopusid7004266679-
dc.affiliationThapliyal, S., Mechanical and Industrial Engineering Department, I.I.T., Roorkee, Uttarakhand, 247667, India-
dc.affiliationDwivedi, D.K., Mechanical and Industrial Engineering Department, I.I.T., Roorkee, Uttarakhand, 247667, India-
dc.description.fundingThe authors would like to acknowledge support received from technical staff of welding research laboratory IIT Roorkee. The technical assistance from Mr. Jasbir Singh is also appreciated.-
Appears in Collections:Journal Publications [ME]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.