Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/12259
Title: Removal of unwanted fluid
Authors: Subudhi, Sudhakar
Sreenivas K.R.
Arakeri J.H.
Published in: Heat and Mass Transfer/Waerme- und Stoffuebertragung
Abstract: This work is concerned with the removal of unwanted fluid through the source-sink pair. The source consists of fluid issuing out of a nozzle in the form of a jet and the sink is a pipe that is kept some distance from the source pipe. Of concern is the percentage of source fluid sucked through the sink. The experiments have been carried in a large glass water tank. The source nozzle diameter is 6 mm and the sink pipe diameter is either 10 or 20 mm. The horizontal and vertical separations and angles between these source and sink pipes are adjustable. The flow was visualized using KMnO4 dye, planer laser induced fluorescence and particle streak photographs. To obtain the effectiveness (that is percentage of source fluid entering the sink pipe), titration method is used. The velocity profiles with and without the sink were obtained using particle image velocimetry. The sink flow rate to obtain a certain effectiveness increase dramatically with lateral separation. The sink diameter and the angle between source and the sink axes don't influence effectiveness as much as the lateral separation. © 2012 Springer-Verlag.
Citation: Heat and Mass Transfer/Waerme- und Stoffuebertragung (2013), 49(1): 95-106
URI: https://doi.org/10.1007/s00231-012-1068-9
http://repository.iitr.ac.in/handle/123456789/12259
Issue Date: 2013
ISSN: 9477411
Author Scopus IDs: 54407504100
57198395297
35581295800
Author Affiliations: Subudhi, S., Department of Mechanical Engineering, National Institute of Technology, Calicut, India
Sreenivas, K.R., Jawaharlal Nehru Centre for Advanced Scientific Research, Bangalore, India
Arakeri, J.H., Department of Mechanical Engineering, Indian Institute of Science, Bangalore, India
Corresponding Author: Subudhi, S.; Department of Mechanical Engineering, National Institute of Technology, Calicut, India; email: subudhi2@yahoo.com
Appears in Collections:Journal Publications [ME]

Files in This Item:
There are no files associated with this item.
Show full item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.