Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/12081
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJadoun R.S.-
dc.contributor.authorKumar, Pradeep-
dc.contributor.authorMishra B.K.-
dc.contributor.authorMehta R.C.S.-
dc.date.accessioned2020-10-15T12:20:33Z-
dc.date.available2020-10-15T12:20:33Z-
dc.date.issued2006-
dc.identifier.citationEngineering Optimization (2006), 38(7): 771-787-
dc.identifier.issn0305215X-
dc.identifier.urihttps://doi.org/10.1080/03052150600733962-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/12081-
dc.description.abstract<p>The effect of process parameters on the cutting ratio (ratio of material removal rate to tool wear rate) for ultrasonic drilling of alumina-based ceramics using silicon carbide abrasive was studied. The parameters considered were workpiece material, tool material, grit size of the abrasive, power rating, and slurry concentration. Taguchi's optimization approach was used to obtain the optimal parameters. The significant parameters were identified and their effects on cutting ratio were studied. The results obtained were validated by conducting confirmation experiments.-
dc.language.isoen_US-
dc.relation.ispartofEngineering Optimization-
dc.subjectAlumina-based ceramics-
dc.subjectCutting ratio-
dc.subjectEngineering ceramics-
dc.subjectOptimization-
dc.subjectTaguchi method-
dc.subjectUltrasonic drilling-
dc.titleOptimization of process parameters for ultrasonic drilling of advanced engineering ceramics using the Taguchi approach-
dc.typeArticle-
dc.scopusid14828871700-
dc.scopusid55952759400-
dc.scopusid7201368191-
dc.scopusid57196535805-
dc.affiliationJadoun, R.S., Production Engineering Department, College of Technology, G.B. Pant University of Agriculture and Technology, Pantnagar-263145, India-
dc.affiliationKumar, P., Mechanical and Industrial Engineering Department, Indian Institute of Technology, Roorkee-247667, India-
dc.affiliationMishra, B.K., Mechanical and Industrial Engineering Department, Indian Institute of Technology, Roorkee-247667, India-
dc.affiliationMehta, R.C.S., Production Engineering Department, College of Technology, G.B. Pant University of Agriculture and Technology, Pantnagar-263145, India-
dc.description.correspondingauthorJadoun, R.S.; Production Engineering Department, College of Technology, G.B. Pant University of Agriculture and Technology, Pantnagar-263145, India; email: rsjadoun63@yahoo.co.in-
Appears in Collections:Journal Publications [ME]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.