Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/11326
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDwivedi, Dheerendra Kumar-
dc.contributor.authorSharma A.-
dc.contributor.authorRajan T.V.-
dc.date.accessioned2020-10-15T12:14:34Z-
dc.date.available2020-10-15T12:14:34Z-
dc.date.issued2008-
dc.identifier.citationInternational Journal of Cast Metals Research (2008), 21(6): 439-444-
dc.identifier.issn13640461-
dc.identifier.urihttps://doi.org/10.1179/136404608X373168-
dc.identifier.urihttp://repository.iitr.ac.in/handle/123456789/11326-
dc.description.abstractThis paper investigates the effects of contact pressure, sliding speed and alloy condition on dry sliding wear behaviour of LM13 (AI-12Si-0.8Cu-1̇0Ni- 0̇6Mg) alloy. A pin on disc type wear testing machine was used to study the wear behaviour of alloy in untreated, melt and heat treated condition. Dry sliding wear tests were performed at two contact pressures (0̇31 and 0̇93 MPa) and four sliding speeds (0̇2, 0̇5, 0̇9 and 2̇0 m s-1). The wear rate decreased with the increase in sliding speed irrespective of contact pressure and alloy condition used in this work. The untreated alloy exhibited higher wear rate than melt and heat treated alloy. The refinement of eutectic Si by melt treatment and spheroidisation of eutectic Si after heat treatment of LM13 alloy have been attributed to the reduction in wear. Melt treatment and heat treatment of LM13 alloy increased the hardness and tensile strength, while increase in ductility was marginal. © 2008 W.S Maney & Son Ltd.-
dc.language.isoen_US-
dc.relation.ispartofInternational Journal of Cast Metals Research-
dc.subjectCast al-si alloy-
dc.subjectDry sliding wear-
dc.subjectHeat treatment-
dc.subjectMelt treatment-
dc.subjectMicrostruoture-
dc.titleEffect of material and test parameters on wear behaviour of eutectic Al-Si alloy (LM13)-
dc.typeArticle-
dc.scopusid7004266679-
dc.scopusid55605770215-
dc.scopusid7005412498-
dc.affiliationDwivedi, D.K., Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee 247667, India-
dc.affiliationSharma, A., Department of Metallurgy, Malaviya National Institute of Technology, Jaipur 302017, India-
dc.affiliationRajan, T.V., Department of Metallurgy, Malaviya National Institute of Technology, Jaipur 302017, India-
dc.description.correspondingauthorDwivedi, D. K.; Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee 247667, India; email: dkd04fme@iitr.ernet.in-
Appears in Collections:Journal Publications [ME]

Files in This Item:
There are no files associated with this item.
Show simple item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.