Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/11297
Title: Effect of fillers on morphological and wear characteristics of NR/HSR blends with E-glass fiber
Authors: Pal, Kaushik
Pal S.K.
Das C.K.
Kim J.K.
Published in: Materials and Design
Abstract: The blends of high styrene rubber (HSR) and natural rubber (NR) with E-glass fiber was prepared using a blending technique in presence of different types of carbon black. The effect of filler on morphological and wear characteristics was studied. ISAF type of carbon black showed a significant effect on optimum cure time, cure rate index and mechanical properties by reacting at the interface between HSR and NR matrix. All the samples show only one melting peak on the DSC curve; this is attributed to the same backbone structure of the matrix and the carbon black reinforcement. The rate of degradation was almost the same up to 90% degradation for all the samples except NSF-1 and NSF-4, may be due to the mixing of N110 and N774 type of carbon black. Blends containing ISAF type of carbon black showed high abrasion resistant properties against Du-Pont abrader, DIN abrader and different mining rock surfaces and also is found to be the toughest rubber against all types of rock. © 2011.
Citation: Materials and Design (2012), 35(): 863-872
URI: https://doi.org/10.1016/j.matdes.2011.07.074
http://repository.iitr.ac.in/handle/123456789/11297
Issue Date: 2012
Keywords: Abrasion
Elastomers and rubber
Thermoplastics
ISSN: 2641275
Author Scopus IDs: 26427760700
7402277643
55664387000
55890748600
Author Affiliations: Pal, K., Polymer Engineering and Science, Gyeongsang National University, Jinju 660-701, South Korea, Department of Mining Engineering, IIT, Kharagpur 721 302, India, Materials Science Centre, IIT, Kharagpur 721 302, India
Pal, S.K., Department of Mining Engineering, IIT, Kharagpur 721 302, India
Das, C.K., Materials Science Centre, IIT, Kharagpur 721 302, India
Kim, J.K., Polymer Engineering and Science, Gyeongsang National University, Jinju 660-701, South Korea
Funding Details: The authors are deeply grateful to Coal India Limited, Kolkata for financial assistance. Authors wish to thank the tire retreading companies for their immense support and supply of raw retreading compounds. Also, special thanks to the members of the Project and key laboratory of Materials Science Centre and Central Research Facility at IIT, Kharagpur.
Corresponding Author: Pal, K.; Department of Mining Engineering, IIT, Kharagpur 721 302, India; email: pl_kshk@yahoo.co.in
Appears in Collections:Journal Publications [ME]

Files in This Item:
There are no files associated with this item.
Show full item record


Items in Repository are protected by copyright, with all rights reserved, unless otherwise indicated.