Skip navigation
Please use this identifier to cite or link to this item: http://repository.iitr.ac.in/handle/123456789/10838
Title: A review of modeling and control during drilling of fiber reinforced plastic composites
Authors: Singh A.P.
Sharma M.
Singh I.
Published in: Composites Part B: Engineering
Abstract: Drilling induced damage in polymer-matrix composites (PMCs) is a research area of immense engineering importance. Various approaches have been tried worldwide to minimize drilling induced damage. In this study, a review of automated drilling operation has been done. Various mathematical modeling methods used for dynamic phenomenon of drilling in PMCs and conventional materials have been discussed. Drilling of fiber reinforced plastic composites can be modeled using empirical techniques, neural network/fuzzy-logic and transfer function modeling methods. This paper brings state-of-the-art in the control of drilling process. The drilling of fiber reinforced plastic composites can be controlled using neural network, fuzzy logic, supervisory, PI, PID, pole placement and adaptive controllers. Results indicate that thrust force and torque have not been controlled simultaneously for delamination free drilling in PMCs. Critical thrust force has also not been precisely tracked. There is a need to create a combined mathematical model consisting of thrust force, torque and feed rate coupled with a suitable control law for simultaneous control of thrust force as well as torque for delamination free drilling of composites. © 2012 Elsevier Ltd. All rights reserved.
Citation: Composites Part B: Engineering (2013), 47(): 118-125
URI: https://doi.org/10.1016/j.compositesb.2012.10.038
http://repository.iitr.ac.in/handle/123456789/10838
Issue Date: 2013
Keywords: A. Polymer-matrix composites (PMCs)
B. Delamination
C. Analytical modeling
Control
ISSN: 13598368
Author Scopus IDs: 57202898195
57198780531
56375560400
Author Affiliations: Singh, A.P., Department of Mechanical Engineering, UIET, Panjab University, Chandigarh, India
Sharma, M., Department of Mechanical Engineering, UIET, Panjab University, Chandigarh, India
Singh, I., Indian Institute of Technology, Roorkee, India
Corresponding Author: Singh, A.P.; Department of Mechanical Engineering, UIET, Panjab University, Chandigarh, India; email: amrinder_21@yahoo.com
Appears in Collections:Journal Publications [ME]

Files in This Item:
There are no files associated with this item.
Show full item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.