| Issue Date | Title | Author(s) |
| 2016 | A nanocomposite membrane composed of incorporated nano-alumina within sulfonated PVDF-co-HFP/Nafion blend as separating barrier in a single chambered microbial fuel cell | Kumar V.; Kumar P.; Nandy A.; Kundu, Patit Paban |
| 2015 | A study on the heat behaviour of PEM, prepared by incorporation of crosslinked sulfonated polystyrene in the blend of PVdF-co-HFP/Nafion, for its high temperature application in DMFC | Kumar P.; Jagwani S.K.; Kundu, Patit Paban |
| 2014 | An overview of unsolved deficiencies of direct methanol fuel cell technology: Factors and parameters affecting its widespread use | Kumar P.; Dutta K.; Das S.; Kundu, Patit Paban |
| 2019 | Atomistic simulations to study crack tip behaviour in single crystal of bcc niobium and hcp zirconium | Singh D.; Sharma P.; Jindal S.; Kumar P.; Kumar P.; Parashar, Avinash |
| 2015 | Coating and lamination of Nafion117 with partially sulfonated PVdF for low methanol crossover in DMFC applications | Kumar P.; Kundu, Patit Paban |
| 2015 | Crosslinked inter penetrating network of sulfonated styrene and sulfonated PVdF-co-HFP as electrolytic membrane in a single chamber microbial fuel cell | Kumar V.; Kumar P.; Nandy A.; Kundu, Patit Paban |
| 2018 | Development of highly efficient bimetallic nanocomposite cathode catalyst, composed of Ni:Co supported sulfonated polyaniline for application in microbial fuel cells | Papiya F.; Pattanayak P.; Kumar P.; Kumar V.; Kundu, Patit Paban |
| 2013 | Effects of various factors on the interfacial mass transfer phenomenon and dispersion of polyaniline in an aqueous/organic bi-/tri-phasic system | Dutta K.; Kumar P.; Das S.; Kundu, Patit Paban |
| 2014 | Enhanced performance of direct methanol fuel cells: A study on the combined effect of various supporting electrolytes, flow channel designs and operating temperatures | Kumar P.; Dutta K.; Kundu, Patit Paban |
| 2018 | Fabrication of cost-effective non-noble metal supported on conducting polymer composite such as copper/polypyrrole graphene oxide (Cu2O/PPy–GO) as an anode catalyst for methanol oxidation in DMFC | Pattanayak P.; Pramanik N.; Kumar P.; Kundu, Patit Paban |
| 2016 | Fabrication of laminated and coated Nafion 117 membranes for reduced mass transfer in microbial fuel cells | Kumar V.; Kumar P.; Nandy A.; Kundu, Patit Paban |
| 2015 | Formation of semi-IPN membrane composed of crosslinked SPS-[PVdF-co-HFP/Nafion] for application in DMFC: A fine tuning between crosslinker and initiator | Kumar P.; Kundu, Patit Paban |
| 2015 | Incorporation of nano-Al2O3 within the blend of sulfonated-PVdF-co-HFP and Nafion for high temperature application in DMFCs | Kumar P.; Singh A.D.; Kumar V.; Kundu, Patit Paban |
| 2014 | Membrane prepared by incorporation of crosslinked sulfonated polystyrene in the blend of PVdF-co-HFP/Nafion: A preliminary evaluation for application in DMFC | Kumar P.; Dutta K.; Das S.; Kundu, Patit Paban |
| 2019 | Nanocomposite polymer electrolyte membrane for high performance microbial fuel cell: Synthesis, characterization and application | Kumar P.; Bharti, Ram Prakash |
| 2014 | Partial sulfonation of PVdF-co-HFP: A preliminary study and characterization for application in direct methanol fuel cell | Das S.; Kumar P.; Dutta K.; Kundu, Patit Paban |
| 2014 | Polymer electrolyte membrane with high selectivity ratio for direct methanol fuel cells: A preliminary study based on blends of partially sulfonated polymers polyaniline and PVdF-co-HFP | Dutta K.; Das S.; Kumar P.; Kundu, Patit Paban |
| 2014 | Utilization of conducting polymers in fabricating polymer electrolyte membranes for application in direct methanol fuel cells | Dutta K.; Kumar P.; Das S.; Kundu, Patit Paban |
