Skip navigation

Browsing by Author Nath S.K.

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:  
Showing results 1 to 20 of 79  next >
Issue DateTitleAuthor(s)
2016A Comparative Study on Tensile and Fracture Behavior of Al–Mg Alloy Processed Through Cryorolling and Cryo Groove RollingYogesha K.K.; Kumar N.; Joshi A.; Jayaganthan R.; Nath S.K.
2013Cavitation and slurry erosion of aluminum in the slurry pot testerAmarendra H.J.; Chaudhari, G. P.; Nath S.K.
2014Cavitation erosion of thermomechanically processed 13/4 martensitic stainless steelKishor B.; Chaudhari, G. P.; Nath S.K.
2016Characterization of hot deformation behavior of a low carbon steel using processing maps, constitutive equations and Zener-Hollomon parameterRajput S.K.; Chaudhari, G. P.; Nath S.K.
2020Comparative Assessment on the Hot Deformation Behaviour of 9Cr–1Mo Steel with 1Cr–1Mo SteelKumar S.; Karmakar, Anish; Nath S.K.
2014Comparison between different processing schedules for the development of ultrafine-grained dual-phase steelKarmakar, Anish; Sivaprasad S.; Nath S.K.; Misra R.D.K.; Chakrabarti D.
2021Construction of hot deformation processing maps for 9Cr-1Mo steel through conventional and ANN approachKumar S.; Karmakar, Anish; Nath S.K.
2016Continuous cooling transformation behavior in the weld coarse grained heat affected zone and mechanical properties of Nb-microalloyed and HY85 steelsKumar S.; Nath S.K.; Kumar V.
2020Critical condition parameters and kinetics of dynamic recrystallization for hot deformed 1 wt%Cr-1 wt%Mo rotor steelKumar S.; Nath S.K.
2019Critical conditions for dynamic recrystallization of hot deformed 1 wt% chromium - 1 wt% molybdenum rotor steelKumar S.; Chaudhari, G. P.; Nath S.K.
2004Development of wear resistant medium carbon dual phase steels and their mechanical propertiesTyagi R.; Nath S.K.; Ray S.
2001Dry sliding friction and wear in plain carbon dual phase steelTyagi R.; Nath S.K.; Ray S.
2011Dry sliding wear and corrosion behavior of ultrafine-grained HSLA steel processed using multi axial forgingPadap A.K.; Chaudhari, G. P.; Nath S.K.
2018Dry Sliding Wear of Fe Based Powder Processed Through Hot Powder Forging TechniqueChaurasia S.K.; Prakash, Ujjwal; Dabhade, Vikram V.; Nath S.K.; Meka S.R.; Chaudhari G.P.
2009EBSD analysis of warm multiaxially forged mild steelPadap A.K.; Chaudhari, G. P.; Nath S.K.; Pancholi, Vivek
2012Effect of Al 2 O 3 reinforcement and Al 2 O 3 -13 wt% TiO2 bond coat on plasma sprayed hydroxyapatite coatingMittal M.; Nath S.K.; Prakash S.
2021Effect of Carbon Addition on Mechanical Properties and Dry Sliding Behavior of Fe-0.65P Alloy Processed by Powder ForgingChaurasia S.K.; Dabhade, Vikram V.; Prakash, Ujjwal; Nath S.K.
2012Effect of deposition parameters & molybdenum percentage on Nickel- Molybdenum alloy coatingsJoshi K.; Amarendra H.J.; Chaudhari, G. P.; Nath S.K.
2016Effect of heat input on impact toughness in transition temperature region of weld CGHAZ of a HY 85 steelKumar S.; Nath S.K.
2018Effect of High Strain Rolling and Multiaxial Forging on Tensile and Fracture Behaviour of ZE41 Magnesium alloyVerma R.; Nath S.K.; Jayaganthan R.; Meka S.R.; Chaudhari G.P.